What is the stopping procedure of a PGH plunger pump?

Jul 11, 2025

Hey there! As a supplier of PGH plunger pumps, I've gotten a ton of questions about the stopping procedure of these bad boys. So, I thought I'd take a deep dive into it and share everything you need to know.

First off, let's talk a bit about what a PGH plunger pump is. These pumps are known for their high efficiency, reliability, and ability to handle high pressures. They're used in a wide range of applications, from industrial machinery to mobile equipment. And if you're looking for more info about Rexroth PGH pumps, you can check out Rexroth PGH.

Now, onto the stopping procedure. There are a few key steps you need to follow to ensure that your PGH plunger pump stops safely and smoothly.

Step 1: Reduce the Load

Before you stop the pump, you need to reduce the load on it. This means gradually decreasing the pressure and flow rate. Why? Well, if you suddenly stop the pump while it's under a heavy load, it can cause a lot of stress on the pump components. This can lead to premature wear and tear, and even damage the pump.

GPP0-A0D40A40AL-111 GPP1-C0C80A1L-113 Gear PumpRexroth A11VLO130 Crane Drilling Machine Mechanical Pump

You can reduce the load by adjusting the pressure relief valve or the flow control valve. Make sure to do this slowly, over a period of a few minutes. This gives the pump time to adjust to the changing conditions.

Step 2: Shut Off the Power

Once the load has been reduced, it's time to shut off the power to the pump. This can usually be done by flipping a switch on the control panel or unplugging the pump from the power source. Make sure to follow the manufacturer's instructions for shutting off the power.

Step 3: Release the Pressure

After the power is off, you need to release the pressure in the pump. This is important because if there's still pressure in the pump, it can cause the pump to start up again unexpectedly.

To release the pressure, you can open the pressure relief valve or the drain valve. This will allow the fluid in the pump to flow out and equalize the pressure. Make sure to do this slowly, as a sudden release of pressure can cause a lot of noise and vibration.

Step 4: Check the Pump

Once the pressure has been released, it's a good idea to check the pump for any signs of damage or wear. Look for leaks, cracks, or any other visible problems. If you notice anything wrong, it's best to have the pump inspected by a professional.

Step 5: Perform Maintenance

Finally, it's time to perform some maintenance on the pump. This can include cleaning the pump, changing the oil or filters, and lubricating the moving parts. Regular maintenance is essential for keeping your PGH plunger pump in good working condition.

Now, let's talk about some common mistakes to avoid when stopping a PGH plunger pump.

Common Mistakes

  • Stopping the pump suddenly: As I mentioned earlier, stopping the pump suddenly while it's under a heavy load can cause a lot of stress on the pump components. Make sure to reduce the load gradually before stopping the pump.
  • Not releasing the pressure: If you don't release the pressure in the pump after shutting it off, it can cause the pump to start up again unexpectedly. Always make sure to release the pressure before leaving the pump unattended.
  • Skipping maintenance: Regular maintenance is essential for keeping your PGH plunger pump in good working condition. Don't skip out on maintenance tasks, as this can lead to premature wear and tear and even damage the pump.

In addition to the PGH plunger pumps, we also offer other great products like the GPP0 - A0D40A40AL - 111 GPP1 - C0C80A1L - 113 Gear Pump and the Rexroth A11VLO130 Crane Drilling Machine Mechanical Pump. These pumps are also known for their high quality and reliability.

If you're in the market for a PGH plunger pump or any of our other products, I'd love to hear from you. We're here to help you find the right pump for your needs and provide you with excellent customer service. Whether you have questions about the stopping procedure or anything else related to our pumps, just reach out and we'll do our best to assist you.

In conclusion, the stopping procedure of a PGH plunger pump is an important process that requires careful attention to detail. By following the steps outlined above and avoiding common mistakes, you can ensure that your pump stops safely and smoothly, and that it lasts for a long time. So, if you have any more questions or if you're interested in purchasing a PGH plunger pump, don't hesitate to get in touch.

References

  • Rexroth Hydraulic Pump Manuals
  • Industry standards for hydraulic pump operation and maintenance