Hydraulic Manual Directional Valve DMT/DMG

1. Model analysis
-DMG: Usually refers to a directional manual valve operated manually.
-01: It may represent the size or diameter of the valve (such as 6-way or 10 way).
-3C2: Refers to the function or neutral function of the valve (such as a three position four-way valve with a neutral position of O or Y).
-10: May represent design code, pressure rating, or interface form.
2. Basic parameters
-Operation mode: manual lever operation.
-Valve position function: usually three position four-way (three position four-way), the center position function may be O-type, Y-type, H-type, etc. (to be confirmed according to specific models).
-Diameter: commonly 6mm or 10mm (to be further confirmed based on "01" or "10").
-Work pressure: usually ranging from 21MPa to 31.5MPa (refer to manufacturer's data for details).
-Flow range: Depending on the diameter, it is usually between 10-40L/min.
3. Interface form
-Usually for plate installation (ISO 4401 standard), the interface size may be NG6 or NG10.
4. Application scenarios
-Used for applications such as construction machinery, agricultural machinery, hydraulic stations, etc. that require manual control of oil path direction.
-Suitable for medium and low voltage or high voltage systems (see model suffix for details).

Hot Tags: hydraulic manual directional valve dmt/dmg, China hydraulic manual directional valve dmt/dmg manufacturers, suppliers, hydraulic valve standards, hydraulic valve budgets, hydraulic valve alternatives, hydraulic valve markings, hydraulic valve taps, new hydraulic valve