AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
video
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump
1/2
<< /span>
>

AZPF-1X-004RCB20KB AZPF-1X-005RCB20MB Hydraulic Charging Pump

Application scenarios -Industrial hydraulic systems: such as machine tools, injection molding machines, presses, etc. -Compact high-pressure system: Due to its small displacement characteristics, it is suitable for situations that require precise flow control. -Mobile machinery: If configured appropriately, it can be used for small engineering equipment.

Model Decomposition Explanation
1. AZPF
-The series name represents Rexroth's high-performance external gear pump, which features high pressure, low noise, and long service life.
2. 1X
-The displacement specification (unit: cm ³/rev) is 1.0 cm ³/rev (i.e. 1 milliliter per revolution), which belongs to small displacement pumps and is suitable for low flow and high-pressure applications.
3. 004
-Design code or version number, which may be related to internal structure optimization or iteration.
4. RCB20
-RCB: Flange interface and shaft extension type, commonly SAE flange or metric flange (specific dimensions need to be confirmed in the manual).
-20: May represent shaft diameter (such as 20mm) or flange standard (such as SAE J744 2-bolt).
5. KB
-Special design or material codes, such as:
-K: It may refer to special sealing materials (such as fluororubber FKM, resistant to high temperatures/chemical media).
-B: It may represent the type of shaft end (such as flat key shaft, spline shaft, etc.).
Technical parameters (typical values)
-Displacement: 1.0 cm ³/rev
-Work pressure:
-Continuous pressure: up to 250 bar (depending on configuration).
-Peak pressure: up to 300 bar.
-Speed range:
-Suggested speed: 1500~4000 rpm (depending on actual working conditions and oil viscosity).
-Flow rate: related to rotational speed (e.g. approximately 3 L/min at 3000 rpm).
-Volume efficiency: ≥ 90% (may be slightly lower under high pressure conditions).
-Medium: Mineral based hydraulic oil (ISO VG 32~68).
-Temperature range: -20 ° C~+80 ° C (depending on the sealing material).
 

Hot Tags: azpf-1x-004rcb20kb azpf-1x-005rcb20mb hydraulic charging pump, China azpf-1x-004rcb20kb azpf-1x-005rcb20mb hydraulic charging pump manufacturers, suppliers, A10VSO PISTON PUMP, A10VSO hydraulic oil pump, PGH plunger pump, Internal gear pump, HD 10AVSO hydraulic oil pump, A10VSO oil pump

Send Inquiry

(0/10)

clearall