Parker Pump P2145R00D1D26TC25N65C3A1P
Parker P21 series, industrial high-pressure axial piston pump, suitable for open circuits. Application scenarios -Typical use: -Construction machinery (excavators, cranes). -Industrial hydraulic systems (injection molding machines, presses). -Ship or mining equipment.
key parameter
-Displacement: Approximately 45 cm ³/rev (subject to official sample).
-Pressure range:
-Maximum working pressure: 350 bar (typical value).
-Peak pressure: 400 bar (briefly allowed).
-Speed range:
-Continuous speed: 1500-2000 rpm (depending on oil viscosity).
-Flow rate: depends on the speed, for example, it is about 67.5 L/min (45 cc/rev x 1500 ÷ 1000) at 1500 rpm.
-Medium: Mineral oil or synthetic hydraulic oil (ISO VG 32-68).
control mode
-Optional control functions (inferred from suffix code):
-Pressure compensation (D1D26): Automatically adjust the flow rate to maintain the set pressure.
-Other possible options: load sensitivity, electrical proportional control (specific suffix meaning needs to be confirmed).
mechanical interface
-Shaft end: TC25 may represent a standard shaft extension of 25mm (such as SAE or DIN standards).
-Install flanges: comply with SAE or ISO standards (such as SAE B or C flanges).
-Port connection: N65 may indicate that the suction/outlet ports are SAE flanges or threaded interfaces (such as 1-1/4 "SAE).
Materials and Sealing
-Sealing option: C3A1P may refer to fluororubber (FKM) sealing, suitable for high temperature or corrosive environments.
-Shell material: usually cast iron or aluminum alloy.
Hot Tags: parker pump p2145r00d1d26tc25n65c3a1p, China parker pump p2145r00d1d26tc25n65c3a1p manufacturers, suppliers
Send Inquiry
