DanFoss Hydraulic Cycloidal Motor OMV500 OMV400
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400
video
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400 suppliers
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400 factory
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400 best
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400 high quality
DanFoss Hydraulic Cycloidal Motor OMV500 OMV400 price
1/2
<< /span>
>

DanFoss Hydraulic Cycloidal Motor OMV500 OMV400

OMV 500 is a medium high pressure, compact, cycloidal hydraulic motor. It is based on the reliable "Olin cycloid" planetary gear principle and is known for its extremely high power density, excellent efficiency, and economical cost. This series of motors is an excellent solution for replacing higher cost or larger size motors in many mobile machinery and industrial applications.

Core features and advantages
Cycloid design: Adopting the Olin planetary gear mechanism, high torque output is achieved through the meshing of the internal ring gear and the cycloidal gear. This design has a compact structure, fewer parts, and high reliability.
Extremely high power density: capable of outputting astonishing torque in a very small installation space, it is a leader among similar products.
High mechanical efficiency: The optimized gear design ensures very high mechanical efficiency throughout the entire working range, thereby reducing energy loss and heat generation.
Excellent starting performance: With high starting torque, it can quickly drive the load.
Smooth low-speed operation: It can operate smoothly even at low speeds, providing good control.
Good economy: While providing high performance, it has a very competitive cost and high cost-effectiveness.
Low noise: The gear meshing process is smooth and the operating noise is low.
Main technical parameters
The following is a typical parameter range for the OMV 500 series:
Displacement: Provides multiple displacement options, covering a range of approximately 250 cc/rev to 1000 cc/rev. OMV 500 is a platform, with specific models corresponding to different displacements.
working pressure:
Continuous working pressure: up to 280 bar
Peak pressure: up to 320 bar
(Please note that the rated pressure of certain specific models may vary, and official information shall prevail)
Output torque: directly related to displacement and pressure. For example, a 500 cc/rev motor has a theoretical output torque of approximately 2000 Nm at a pressure of 250 bar.
Speed range:
Maximum speed: Depending on the displacement, it can reach up to 600 rpm or higher.
Shaft type: Provides spline shaft (most common), flat key shaft, or double flat key shaft.
Installation method: SAE standard flange installation (such as SAE A, SAE B, SAE C, etc.), providing multiple options to meet different installation needs.
Rotation direction: Can rotate in both directions.
3. Optional configurations and functions
Rear mounted multi disc hydraulic brake: This is a crucial option that provides safe parking or emergency braking functionality. The brake is usually integrated at the rear end of the motor, with a compact structure.
Valve configuration:
Free wheel valve: allows the motor to rotate freely under external load when the pump is not supplying oil (similar to the neutral gear of a car).
Cross overflow valve: Provides overload protection to prevent hydraulic shock from damaging the motor.
Leakage port: used to divert the leaked oil from the internal shell back to the oil tank.
Speed sensor interface: optional for speed feedback.
4. Typical application areas
OMV 500 is widely used due to its compact and efficient features
Construction machinery: walking and turning drive for small excavators, drum drive for concrete mixers, vibration wheel drive for vibratory rollers, wheel drive for skid steer loaders.
Agricultural machinery: cutting table and agitator drive for combine harvesters, metering drive for seeders, fertilizer applicator, and pipe roller.
Material handling: winch, winch, conveyor belt drive, forklift walking and lifting drive.

Hot Tags: danfoss hydraulic cycloidal motor omv500 omv400, China danfoss hydraulic cycloidal motor omv500 omv400 manufacturers, suppliers, risks for hydraulic pump, solutions for hydraulic pump, strategies for hydraulic pump

Send Inquiry

(0/10)

clearall