
Parker Hydraulic Motor M5BF0452N04B1M000
Parker Hannifin's "BF" series is a radial piston motor with high pressure, large displacement, low speed, and high torque. It is known for its durability, high starting torque, and excellent low-speed performance, and is commonly used in heavy equipment such as construction machinery, mining machinery, and ships.
Model Analysis: M5BF0452N04B1M000
The model code of Parker usually follows a structured rule, and the meanings of each part are as follows:
M5: Usually represents the standard form for installing flanges and shaft ends. M5 is a specific interface standard (such as SAE flange, shaft size, etc.), and specific dimensions need to be consulted in the chart. It defines how the motor is mechanically connected to the device.
BF: Series code. This represents Parker's "BF" series radial ball plunger hydraulic motor.
045: Displacement code. This is one of the most crucial numbers. It represents the theoretical displacement of the motor. Usually, '045' corresponds to approximately 4500 cc/rev (4.5 liters/rev). This is a very large displacement, which means that 4.5 liters of hydraulic oil will be pumped per revolution, generating enormous torque.
2: Design sequence or variant code. This is the second design variant under this displacement, which may involve internal optimization or specific application adaptation.
N: Rotation direction.
N=bidirectional rotation. This is the most common design, where the direction of rotation of the motor is determined by the direction of the inlet and outlet ports.
(Other possibilities: R=only right-handed, L=only left-handed)
04: Axis type code. This defines the style of the output axis.
04 usually represents a flat key spline shaft with a 1:10 taper. This is a very sturdy connection method that can transmit huge torque and ensure alignment accuracy.
B1: Port location and type code.
B usually indicates that the oil port is located on the side of the motor.
1 represents the thread specification of the oil port (such as SAE straight thread). The specific size (such as 1-1/2 ") needs to be confirmed by checking the table.
M000: Special option code. This section represents special configurations for customer requirements.
M may represent metric threads (if the standard is imperial) or other modifications.
000 is usually a reserved space, which may indicate no special options or standard configuration. It may also be due to special sealing, surface treatment, testing requirements, etc.
Main technical features (based on BF series and displacement inference):
Type: Radial piston motor (ball plug design).
Displacement: Approximately 4500 milliliters per revolution.
working pressure:
Continuous working pressure: typically up to 350 bar
Peak pressure: can reach 400 bar or higher
Torque output:
Theoretical torque is extremely high. Theoretical torque (Nm) ≈ displacement (ml/rev) × pressure (bar) ÷ 62.8
For example, at a pressure of 350 bar, the theoretical torque is approximately 4500 × 350/62.8 ≈ 25000 Nm. The actual output torque may be slightly lower (multiplied by mechanical efficiency).
Speed range: As a large displacement motor, its maximum speed is relatively low, and the rated speed may be around tens to 200 revolutions per minute, depending on the operating conditions.
Efficiency: High starting torque, good low-speed stability, high overall efficiency (volumetric efficiency x mechanical efficiency).
Application areas: Very suitable for directly driving heavy equipment, such as:
Drilling rig, winch
Ship propulsion system
Mining machinery (such as crushers, conveyor drives)
Rotary or walking drive of heavy construction machinery
Hot Tags: parker hydraulic motor m5bf0452n04b1m000, China parker hydraulic motor m5bf0452n04b1m000 manufacturers, suppliers, F11oil motor, 112A Oil Motor, A2FM hydraulic piston motor, 112A oil pump, 112A high speed oil motor, oil motor
Send Inquiry












