90M100 90M130 Motor Mixer Truck Drive
The Danfoss hydraulic motor 90M100 is a hydraulic motor produced by Danfoss, belonging to its 90 series products. Typical applications: Construction machinery (excavators, cranes). Agricultural equipment (harvesters, tractor drives). Industrial hydraulic systems (winches, mixers).
Basic parameters
-Model: 90M100
-'90' represents the series (90 series, medium high voltage motor).
-M "usually represents the type of motor (such as axial piston motor).
-'100' may refer to displacement (such as 100 cm ³/rev) or other specification codes, please refer to the technical manual for details.
-Displacement: The commonly used 90 series has a wide displacement range (such as 50-500 cm ³/rev), and it is necessary to confirm whether 100 is the displacement value.
-Work pressure:
-Rated pressure: typically 250-350 bar (depending on the specific model).
-Peak pressure: may reach 400 bar.
-Speed range: Depending on displacement and load, it is usually between a few hundred and 3000 rpm.
-Torque output: Dependent on displacement and pressure, a 100 cm ³/rev motor has a theoretical torque of approximately 480 Nm at 300 bar.
Design Features
-Structural type: Axial plunger design, suitable for medium and high pressure applications.
-Control mode: Optional open/closed circuit, with or without valve control (such as proportional valve).
-Installation method: flange or shaft end installation (ISO/SAE standard).
Hot Tags: 90m100 90m130 motor mixer truck drive, China 90m100 90m130 motor mixer truck drive manufacturers, suppliers, custom hydraulic motor, hydraulic motor for conveyor systems, hydraulic motor for rotary applications, hydraulic motor for pharmaceutical machinery, hydraulic motor for packaging machinery, hydraulic motor for loaders
Send Inquiry
